Services

A WORD ABOUT OUR COMPANY & CREW

McConnell & Scully, Inc. has been servicing oil wells for over 52 years! Our servicing units range from single poles to double derricks, enabling us to handle the smallest to the very largest job that you may need performed. McConnell & Scully, Inc. has most every tool or other piece of servicing equipment you may need.

A WORD ABOUT OUR SERVICE UNITS

All of our service units will be equipped with a pickup & communication system, rod tools–3/4″, 7/8″ & 1″, tubing handling tools–2 3/8″ & 2 7/8″,swabbing tools and hand tools at no extra cost. Other special tools needed will be at the customer’s expense.

Our pump shop department is available to build new pumps or repair or rebuild existing ones. We also have a full service pump truck and vacuum truck division, as well as a sandblasting and painting department. Lease Operating is also available to keeps wells producing at their top rate. This service includes daily lease checks, gauging, minor maintenance, production preparation and record keeping. Rates quoted upon request.

Rig #51: Double Triple Derrick w/Double Drums

1977 Cooper — Model LTO-350
5-Axle Carrier w/Hydromatic Brakes
500 Horse Power–60 Series Detroit Engine
97′ x 180,000 Capacity

Rig #54 Double Triple Derrick w/Double Drums

1982 Moeller–Model 42B
5-Axle Carrier w/Hydromatic Brakes
400 Horse Power–8V92 Detroit Engine
97′ x 180,000 Capacity

Rig #56: Double Triple Derrick w/Double Drums

1980 Wilson Mogul–Model 42B
5-Axle Carrier w/Hydromatic Brakes
400 Horse Power–8V92 Detroit Engine
104′ x 250,000 Capacity

Rig #57 Double Triple Derrick w/Double Drums

2011 Service King–Model 575
5-Axle Carrier w/Dual Assist Brakes
500 Horse Power–60 Series Detroit Engine
104′ x 250,000 Capacity

Rig# 58: Double Triple Derrick w/Double Drums

2013 Service King–Model 575
5-Axle Carrier w/Dual Assist Brakes
500 Horse Power–60 Series Detroit Engine
104′ x 230,000 Capacity

Rig #59: Double Triple Derrick w/Double Drums

2011 Service King–Model 575
5-Axle Carrier w/Dual Assist Brakes
500 Horse Power–60 Series Detroit Engine
104′ x 250,000 Capacity

Rig #60: Double Triple Derrick w/Double Drums

1981 Cooper–Model LTO-350
5-Axle Carrier w/Hydromatic Brakes
400 Horse Power–8V71 Detroit Engine
97′ x 180,000 Capacity

All Service Units are equipped with rod tools: 3/4″, 7/8″, and 1″ and tubing handling tools: 2 3/8″ and 2 7/8″. Other special tools needed will be at the customer’s expense.

STAND-BY-TIME:
Stand-by-time for Rigs will be charged at $1,470.00/day. This does not apply to nightly or weekend shut down.

WORKING A RIG ON A HOLIDAY:
If a rig is needed to work on a paid holiday, there will be an extra $100.00/hour added to the rig price to cover overhead.

CREW TRAVEL WITHOUT RIG:
If a rig crew is traveling to or from a job site which already has our rig on location, that travel time will be charged at $131.00/hour for a two-man crew, $189.00/hour for a three-man crew, or $247.00/hour for a 4-man crew versus the regular rig rate. Once on location, the regular rig rate will become effective. This travel rate will only be effective if the one-way trip to or from the rig is more than one hour in duration.


FLOW TESTING:

Services Hourly Rates
Flow testing w/pickup–one man $77.50
Flow testing w/pickup–two-man crew $135.50
Flow testing w/pickup–three-man crew $193.50


OTHER EQUIPMENT:

Services Rates
Annular B.O.P $850.00 First 3 Days
$255.00/Day Thereafter, Plus Any Damages/Rubbers
Double Hydraulic BOP $650.00 First 3 Days
$195.00/Day Thereafter, Plus Any Damages/Rubbers
Double Manual BOP $600.00 First 3 Days
$180.00/Day Thereafter, Plus Any Damages/Rubbers
Closing Unit $500.00 First 3 Days
$150.00/Day Thereafter
Geolograph Trailer $120.00/Day
Mobile Office Trailer $100.00/Day
Light Plant $90.00/Day
Changeover Flange/Spool $155.00 First 3 Days
$50.00/Day Thereafter
TIW Valve $50.00/Day
Tubing Tongs: (Not to be used for Drilling)–(under 3 1/2) $260.00/Day
Tubing Tongs: When Used for Drilling $1,600.00/Day
Tubing Tongs w/Operator: (When not used with our rig) $110.00/Hour
(Plus transportation to & from location)
Pipe/Tubing Wiper $50.00/Day
Rod Tongs $180.00/Day
Power Swivel & Mud Pump $1,250.00/Day
Operator for Above $77.00/Hour
Extra Mud Pump $550.00/Day
Shale Shaker $210.00/Day
Wellheads $250.00 First 3 Days
$75.00/Day Thereafter
Rental of Various Wellheads and Parts Quoted Upon Request

*Hourly charges for our Operator when not used with our equipment
**These rates do not include the moving of equipment

OTHER RIG RELATED SERVICES:

Services Rates
Swabbing After Acid (H20 Must Be On Location After Acid)
*Note* Customer will be responsible for all costs for any damage to line.
$300.00/Day
Swabbing H2S Well
*If Self-contained air packs are needed for working in H2S, the prices are: $40.00/day; $5.00/day stand-by; $5.00/day for monitor.
$300.00/Day, Plus Cleaning
Pulling 100,000 lbs. to 150,000 $400.00/Day
Pulling 150,000 lbs. or More $600.00/Day
Anchor Installation w/Anchor Truck (excluding anchors) $95.00/Hour
Anchors Cost Plus 15%
Base Beams $100.00 Per Day
Crane Mats $10.00/Mat Per Day
Cellar Quoted Upon Request


MISC. EQUIPMENT, SERVICES, AND SUPPLIES:

Services Rates
Rod Fishing Socket/Tools $175.00/Job Plus Any Damages
Bowen Rod Socket $225.00/Job Plus Any Damages
Taper Tap $150.00/Job Plus Any Damages
Stripper Head $150.00/Day Plus Rubber
Test Tank/Half Tank/Mud Tank
*Note* Tank Cleaning at Customer’s Cost
$175.00 3-Day Minimum
$50.00/Day Thereafter
Pipe Racks $70.00 First 5 Days
$12.00/Day Thereafter
Kelly Hose/High Pressure Hose $125.00 First 5 Days
$22.00/Day Thereafter
Flow Line Pipe (per 100′) $100.00 First 5 Days
$18.00/Day Thereafter
Trash Pump $150.00
Generators $150.00 plus Fuel
Orbit Valve–4 1/2″, 5 1/2″, or 7 1/2″ $250.00
Line Counter $130.00/Day
Hot Tap $250.00/Job
Standing Valve
*Note* It is the customer’s responsibility to decide when to install and when to remove the standing valve. McConnell & Scully, Inc. will buy back the standing valve for parts & labor at customer’s request.
$325.00 Purchase
Drill Pipe–3 1/2″ .25/Ft. per Job Plus any Damage
Drill Collars–2 7/8″, 3 1/8″, 4 3/4″ $75.00 per Collar First 3 Days
$22.00/Day Thereafter
Pit Liner Material Quoted Upon Request


CASING/FISHING TOOLS & RELATED EQUIPMENT:

Equipment Rates
4 1/2″ Casing Tongs .50/Ft Plus any Damages
5 1/2″ Casing Tongs .55/Ft Plus any Damages
7″ Casing Tongs .65/Ft Plus any Damages
8 5/8″ Casing Tongs .75/Ft Plus any Damages
4 1/2″ Casing Spear $800.00 First 3 Days
$240.00/Day Thereafter Plus any Damages
5 1/2″ Casing Spear $900.00 First 3 Days
$270.00/Day Thereafter Plus any Damages
7″ Casing Spear $1,000.00 First 3 Days
$300.00/Day Thereafter Plus any Damages
8 5/8″ Casing Spear $1,250.00/First 3 Days
$375.00/Day There Plus any Damages
4 1/2″ & 5 1/2″ Mechanical Casing Cutters $1,000.00 First 5 Days, Plus Blades
Tubing Spear $600.00 First 3 Days
$180.00/Day Thereafter Plus any Damages
Tubing Overshot $600.00 First 3 Days
$180.00/Day Thereafter Plus any Damages
Operator to Run Above Fishing/Casing Tools $77.00/Hour
Casing Handling Tools (3 1/2″ and up) $450.00/Day Plus any Damages
Casing Swabbing Tools $425.00/Day
Sand Pump $400.00/Day Plus any Damages
Bit & Scratcher $350.00/Job
Bailer $300.00/Day
Mudbox/Mudboat $325.00/Job, Plus Rubbers


PUMP TRUCK AND VACUUM TRUCK SERVICES:

Equipment Hourly Rates
Pump Truck/Hot Oiler w/Operator $145.00 Plus Cost of Propane
130 BBL Vacuum Truck $100.00
70 BBL Vacuum Truck $90.00
Brine and Fresh Water Disposal Fee $.70/BBL
Solidify B.S. $110.00.00/BBL
Pit Water Disposal Fee $1.20/BBL

WORKING ON A HOLIDAY:
If any of the above equipment is needed to work on a paid holiday, there will be an extra $27.00/hour added to the equipment price to cover overhead.

PUMP SHOP SALES & SERVICE:
We are an authorized Weatherford Distributor. We build new pumps and repair old ones. Our shop carries most sizes and styles of down-hole pumps in stock for exchange, ready for immediate delivery.

Service Rates
Pump Repair & Salvage of Parts $77.00/Hour
Tubing Anchor Repair $175.00/Anchor (Plus Parts)


SANDBLASTING & PAINTING SERVICES:

Services Rates
Sandblasting w/Compressor, w/Operator $100.00/Hour
Paint Sprayer w/Compressor, w/Operator $100.00/Hour
Mileage $1.10/Mile


LABOR:

Service Hourly Rates
Tool Pusher $80.00
Foreman $68.00
Roustabout/Helper $58.00
Mechanic $75.00
Overnight/Pier Diem
*Note* Time and a half will be charged on all above labor for Weekends and Holidays
$135.00/Man per Night
Job Supervision $1,000.00/Day Plus Expenses
Supervisor Per Diem Cost plus 15%


CONSTRUCTION & HEAVY EQUIPMENT:

Equipment Hourly Rates
Winch Truck (Gin Pole–Single Axle) $85.00
Tandem Winch (Gin Pole) Truck $100.00
Tandem Tractor w/Winch $100.00
Tandem Tractor w/Winch & Trailer $110.00
Tractor & Lowboy $110.00
Tractor & Trailer $110.00
Tandem Truck Tractor $95.00
Roustabout Truck & Equipment $38.00
Delivery Pickup (Hot Shot) w/Driver $75.00
Tandem Axle Trailer/Car Trailer

–Left for Storage

–Left for Pipe Racks

$16.00

$150.00/Day

$150.00/Day

Dump Truck–15yd. $90.00
Dump Truck–Lead $100.00


EXCAVATING EQUIPMENT:

Equipment Hourly Rates
Backhoe $100.00
Backhoe w/Hydraulic Jackhammer $150.00
Sweeper Brush w/Tractor $100.00
Dresser TD-9H Dozer $100.00
D-6 Dozer $120.00
Excavator $125.00
Crane $150.00
Bucket Truck–40′ capacity $100.00
Trailer Mounted Manlift–55′ capacity $100.00
Payloader/Forklift $100.00
Forklift (all Terrain) $86.00
Welder $86.00


MISC. CONSTRUCTION EQUIPMENT:

Equipment Hourly Rates
Tractor w/Mower or Tractor w/Brush Hog $86.00
Power Washer w/Truck & Operator $100.00
Power Washer/Steamer $25.00
Air Compressor $75.00
Chain Saws/Weed Eaters $25.00
Air Hammer $125.00